How to Download and Install Call Touch C201 Firmware
If you are looking for a way to update, downgrade or repair your Call Touch C201 device, then you have come to the right place. In this article, we will show you how to download and install the official Call Touch C201 firmware (flash file) on your computer. The firmware will help you to fix any software issue, bootloop issue, IMEI issue or dead issue on your device. You will also learn how to use the flash tool and the USB driver that are included in the firmware package.
Call Touch C201 Firmware
Download: https://ruffsandbiten.blogspot.com/?c=2tGJm0
What is Call Touch C201 Firmware?
Call Touch C201 firmware is a software program that contains the operating system and other files that are needed for your device to function properly. The firmware is stored in the internal memory of your device and can be updated or replaced by flashing it with a compatible flash tool. Flashing means transferring the firmware from your computer to your device using a USB cable.
Why do you need Call Touch C201 Firmware?
There are many reasons why you might need to flash or install Call Touch C201 firmware on your device. Some of them are:
You want to upgrade or downgrade your device to a different version of Android.
You want to fix a software issue that is causing your device to malfunction or freeze.
You want to restore your device to its original factory settings.
You want to unroot your device or remove any custom ROM that you have installed.
You want to fix an IMEI issue that is preventing your device from making or receiving calls.
You want to revive your device if it is stuck on the logo screen or does not power on.
How to download Call Touch C201 Firmware?
To download Call Touch C201 firmware, you need to follow these steps:
Click on this link[^1^] to go to the official website of Firmware File, where you can find the latest and tested version of Call Touch C201 firmware.
Scroll down and click on the \"Get Link\" button under the file name \"K-Touch_C201_6600L_8MB_28102011_MIRA.zip\". This is the firmware file that you need to download.
Wait for a few seconds and then click on the \"Download\" button that appears on the next page. The download will start automatically.
Save the firmware file on your computer in a location that you can easily access later.
How to install Call Touch C201 Firmware?
To install Call Touch C201 firmware, you need to follow these steps:
Extract the firmware file that you have downloaded using a zip extractor tool like WinRAR or 7-Zip. You will get four files: Flash File, Flash Tool, USB Driver and How-to Flash Guide.
Install the USB Driver on your computer by running the setup file. This will enable your computer to recognize your device when you connect it with a USB cable.
Open the Flash Tool folder and run the Miracle Box Software as administrator. This is the flash tool that you will use to flash or install the firmware on your device.
Click on the \"MTK\" tab and then click on \"Write\". This will open a new window where you can select the firmware file that you want to flash.
Click on the \"Folder\" icon and browse to the location where you have extracted the firmware file. Select the file named \"K-Touch_C201_6600L_8MB_28102011_MIRA.bin\" and click on \"Open\".
Click on \"Start Button\" at the bottom of the window and wait for the flash tool to load the firmware file.
Turn off your device and remove the battery if possible. Then connect it to your computer using a USB cable while holding down the Volume Down key. This will put your device in download mode and allow the flash tool to detect it.
Wait for the flash tool to flash or install the firmware on your device. You will see a green circle with \"OK\" when it is done 29c81ba772
https://www.lostsolz.com/group/artists/discussion/a89c5dc5-e480-48c8-94ac-ac25be2f5bc2